Professional SPF roof installation, coating, and insulation in Price, UT. Free inspections. Call today for a no-obligation estimate.
Comprehensive spray foam roofing and insulation services tailored for Price properties.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Roof leaks and energy waste do not care how small your town is. In Price, UT, Lapolla Industries provides the same professional spray foam roofing and insulation services that protect large commercial facilities — scaled to fit your property and your budget. We diagnose the real problem, explain your options honestly, and fix it right the first time.
Our Price customers stay with us because we deliver results, not excuses. Whether it is a persistent flat roof leak, a foam roof that needs recoating, or an attic that turns into a furnace every summer, Lapolla Industries has the equipment and expertise to solve it permanently. One call to (866) 605-0362 is all it takes to get started.
Quality, integrity, and results — the Lapolla Industries difference for Price property owners.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Spray foam roofing eliminates tear-off waste, reduces energy consumption, and extends roof life by decades. Our systems help property owners reduce their environmental footprint while saving money.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Common questions about spray foam roofing and insulation in Price, UT.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Price homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Yes. Every project in Price begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
A properly installed SPF roof in Price can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Price we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Spray foam is one of the best solutions for flat and low-slope roofs in Price. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Most residential attic insulation projects in Price are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Our reputation is built on results. Here is what our customers say.
"Attic insulation upgrade from blown-in to spray foam. The crew masked everything off properly and the overspray was minimal. The temperature in our attic dropped dramatically and so did our energy bills. Worth the investment."
"Our 18-year-old roof was showing its age but still structurally sound. Lapolla Industries recommended restoration over replacement and it was the right call. New coating, sealed seams, and a 15-year warranty. Smart investment."
"Our old three-layer built-up roof was beyond saving. They stripped everything down to the deck, repaired the substrate, and installed a new spray foam roofing system. The building is better insulated now than it has ever been."
Looking for a spray foam contractor near Price? We serve these surrounding areas too.